Home > Product > PU Foam Gun

Polyurethane Foam Gun, Polytetrafluoroethylene Coating Adapter

Polyurethane Foam Gun, Polytetrafluoroethylene Coating Adapter
Heavy aluminum alloy polyurethane foam gun with a polytetrafluoroethylene coating adapter
Product Details:

1. The material of the gun body: aluminum alloy

2, adapter coating: polytetrafluoroethylene

3, trigger: Iron and nickel

4, Gun barrel: Steel

5, needle: stainless steel

6, OEM: allow


Heavy aluminum alloy polyurethane foam gun with a polytetrafluoroethylene coating adapter


Description:


After the use of the foam gun:

1. A gun that leaves a foam after use. Always put a pot filled with foam on the gun.

2. Completely tighten the flow adjusting screw. Don't empty the gun. The gun must be full

Foam; otherwise the foam is solidified through the humidity of the air.

3. The store can straighten up (the gun is on the top of the tank).


Use the foam gun again:

1. Shake the tank hard (with a gun).

2. Use a sharp knife to carefully remove the solidified foam on the nozzle.

3. Loosens the flow adjustment screw gently and releases the foam immediately until the foam is flowing out.That's right.

4. This gun can now be used.

5. The foam output can control the gun's trigger.


Replacement of foam tank:

1. Check whether it is empty to distribute foam in a trash can until no more foam is released.

2. Take a new pot of foam. Shake it hard.

3. Open the empty tank (keep the valve open away from you) and remove the release foam from the adapter.Replace the empty tank without a new cleaning agent.

4. The dilatation tube was filled with foam immediately.


The cleaning of the foam gun in the interruption:

1. Unscrew the foam tank (keep the valve away from you).

2. Take a jar of foam gun cleaners and nail them to the gun.

3. Pull the trigger and fill the gun with a cleaning agent.

4. The cleaner must stay in the gun for about 15 minutes.

5. Pull the trigger again and fill the gun with the detergent.

6. Unscrew the tank type foam cleaner.

7. Wipe the superfluous detergent of the adapter with a paper towel. Use a Vaseline spray to lubricate the thread.

8. Put the foam on the gun.

9. Once again drew the trigger until the release of foam and thoroughly clean.

10. This gun can now be used again.


Application:


1. Take a pot of foam and shake it hard.

2. The screws can be mounted on the adapter of the foam gun (not too tight).

Three. Gently release the flow adjustment screw, immediately release the foam, so that the whole gun is full of foam.

4. The foam gun is now available.

5. The foam output can be controlled by the flow regulation screw.



Competitive advantage:


1 question: are you a factory or a trading company?

We are a factory.


2 question: where is your factory? How do I get there?

Answer: our factory is located in Hangzhou, Zhejiang Province, China, with developed traffic. Welcome to our factory.


3 question: do you accept OEM?

Yes, we have 8 years of OEM experience.


4 question: how can I get some samples?

We are honored to provide you with samples.


5 question: how do I know the quality of the product and the way of packing is what we need?

Answer: every product is tested before delivery, and we will check the details of each product with our customers.


Meijiang Hardware Factory is one of the leaders in the market of foam guns. We consistently insist on high quality products with good price even in competitive markets. So our products are always praised by our customers with our superior and stable quality. Besides, our factory has a high standard and energetic team including skilled workers, professional technicians, and excellent salesmen.


Meijiang Hardware Factory keeps the idea that a company will go far with creativity. So every year we are developing much more new models, now there are more than 40 styles. Many of them have patents and CE certificates.


As an international manufacturer and supplier in line of building construction tools , especially for foam guns, Meijiang Hardwar Factory has exported its products all over the world since 2000. Products are mainly sold to Europe, North America, Asia and many other countries.


Providing quality products, excellent service, and competitive prices, we are looking forward to greater cooperation with overseas customers based on mutual benefits.


Welcome to contact us for more information.


Should you have any preference for the polyurethane foam gun, polytetrafluoroethylene coating adapter, welcome to contact our professional China manufacturers. We now have many low price products in stock, and the customized service and the free sample are also offered.
Hot Tags: polyurethane foam gun, polytetrafluoroethylene coating adapter, China, manufacturers, customized, low price, in stock, free sample
Related Products
Feedback: