Home > News > Content
How To Use The Foam Gun Correctly
Jan 06, 2018

1. Take a super - foamed gun. First pull the trigger and put the gas inside the gun, so as to ensure the seal of the gun.

2, to fetch a bottle of foaming agent, hand hold tank body along the transverse direction of the tank body forced at least 20 jolt, make sure that the tank prepolymer mixing;


3, remove the protective cover on the valve threads of foaming agent, foaming agent can put down the thread onto the foam gun on the interface; 4, to ensure that the Gunners hold foaming, tank placed in the top in the bottom of the tank, foam gun, foam gun open rear flow regulating valve; 4, the gun head filling site the bottom or internal to the object, gently pull the trigger to start construction. It can be adjusted to appropriate flow through the flow mediation valve behind the foaming gun.


5, after a jar of spray, if still need to fill, can take off the empty tank immediately, according to the method of the third point to reinstall the foaming agent, continue to work.


6. After the completion of the construction, take the material tank in time and replace the special cleaning agent to clean the foam gun so as to avoid the residual material solidifying and blocking and destroying the foam gun


Zhuji Meijiang Hardware Factory
Add:Jiangdong Road East Diankou Town, Zhuji City, Zhejiang provice
Tel:+86-575-87865037
Fax:+86-575-87068255
Ph:+8613616505798
E-mail:
Ice@zjmeijiang.com