Home > News > Content
Bubble Gun User's Manual
Sep 23, 2017

PU Foam Gun instructions

1: before use: the foam cans. Up and down for up to 1 minute.

2: the tank into the adapter (not too tight!)

3: When the injector starts to work, press the board and let the foam flow for 10 seconds.

The foam is filled with an extension tube. Drive out residual air.

4: Fix the needle to the nozzle.

5: flow control device with a new time with a tank syringe should be kept erect.

6: Foam output is adjusted with the board and controlled by the flow adjustment screw. If the adjusting screw is tightened,

The syringe plate holder is locked Do not turn over three turns to release the adjustment screw.

7: replace the tank when trying to shake the new tank, remove the empty cans.

Quickly (within a minute) to install a new structure foam cans.

8: The tank must be fast to prevent the foam from hardening in the adapter.

9: Replace the needles to harden the foam.

10: Quickly remove the tank when cleaning the gun. Turn the cleaning agent upside down

Bubble gun adapter on the button board machine for thorough cleaning.

11: Foam hardening residue on the front mouth of the foaming gun is removed by the faction or the like.

Use a metal brush or knife to clear the outside of the long tube


Take some time to remove the tank

Do not "repair yourself", so as not to damage the syringe

Do not use hard objects to clean the adapter

Zhuji Meijiang Hardware Factory
Add:Jiangdong Road East Diankou Town, Zhuji City, Zhejiang provice